hinges general information

We offer a large choice of hinges for many different applications but - for most standard kitchen or wardrobe door situations we suggest the series 200 hinge C2A6A99 and the mounting plate BAV3L39

All our hinges are sold individually unless specified.
Hinge mounting plates must be ordered separately.
Fixing screws are not included unless specified.
how many hinges per door?

As there are so many variations in weight and size of doors the following suggestions are intended as a guide only and are based on an 18mm chipboard or mdf door up to 600mm wide.

Up to 900mm high 2 hinges per door
Up to 1600mm high 3 hinges per door
Up to 2000mm high 4 hinges per door
Up to 2400mm high 5 hinges per door
number of hinges illustration
mounting plates

Series 200 hinges can be used with BA series mounting plates to give a superior quality snap on hinge system in all opening angles. BAR hinge plates have the additional feature of single screw cam adjustment in all planes.

Series 200 hinges can also be used with B2 series mounting plates giving a more economical slide on hinge function using the simpler hinge plate.

Series 900 hinges are used only with B2 series mounting plates and offer a fully adjustable low cost range of cabinet hinges.

Airmatic hinge is designed for use with a straight snap-on base plate G3/AZ
installation

Many carcase thicknesses and door widths are used in furniture manufacture. It is important therefore to achieve the correct distance by which the door overlaps the carcase side panel, so that the door can turn without fouling. This is determined by the mounting plate height, drilling position 'K', door clearance gap and overlay.
installation illustration
which type of hinge?

For a carcase made from 15/16mm board the use of a 5mm cranked hinge with 0mm mounting plate is recommended and for a carcase made from 18/19mm board a straight arm hinge with 3mm mounting plate.
Alternatively on 15/16mm board a straight arm hinge can be used with a 6mm mounting plate.
hinge and hinge plate compatibility

cabinet components, Claro Court Business Centre, Claro Road, Harrogate HG1 4BA. 01423 521467