A modern curved cornice/light pelmet for use with the radius feature ends.

Dimensions: -
28mmx50mm/337mm long x 103mm wide, with a 64mm outer radius.

Finished on the front side & 2 edges, reverse is matt lacquered.

Curved modern cornice for use with the small curved door, 300mm unit, unhanded

Ref: FRCCS300SD

Price: £57.90 (Excluding VAT at 17.5%)

Quantity:

A modern vinyl wrapped curved cornice/light pelmet for use with the small curved door.

Plinth, 3050x150x16mm

Ref: FRP30

Price: £28.16 (Excluding VAT at 17.5%)

Quantity:

Vinyl wrapped Plinth, 3050x150x16mm

Plinth, flexible laminate, 2450x150x1.5mm

Ref: FRFP24

Price: £56.92 (Excluding VAT at 17.5%)

Quantity:

Plinth, flexible laminate, 2450x150x1.5mm

S shaped plinth 800X150X16mm

Ref: FRSP800

Price: £66.90 (Excluding VAT at 17.5%)

Quantity:

Curved 'S' shaped plinth for use with either 'S' shaped doors or drawer fronts.

Dimensions: -
150mm x 16mm x 800mm

Finished on front side and matt lacquered on reverse. Top and bottom edges are not edgebanded.

S shaped plinth 1000x150x16mm

Ref: FRSP1000

Price: £68.29 (Excluding VAT at 17.5%)

Quantity:

As above but 1000mm

S shaped plinth, 1200x150x16mm

Ref: FRSP1200

Price: £58.34 (Excluding VAT at 17.5%)

Quantity:

as above but 1200mm

Curved plinth section for use with the small curved door 530x150x16mm

Ref: FRCPS560SD

Price: £62.33 (Excluding VAT at 17.5%)

Quantity:

A modern curved plinth for use with the small curved door.

Curved plinth section for 560x430mm curved base unit

Ref: FRCPS560

Price: £56.79 (Excluding VAT at 17.5%)

Quantity:

A modern curved plinth for use with the curved base unit doors.

Dimensions: -
150mm x 16mm/531mm long x 386mm wide, with a 313mm outer/297mm inner radius with straight ends
The length can be reduced by 15mm to allow for a shallower carcase

Finished on the front side with the reverse matt lacquered.

NOTE - The plinth should be set 44mm back from the carcass

Corner post, 715x70x18mm

Ref: FRCP30

Price: £26.64 (Excluding VAT at 17.5%)

Quantity:

Corner post supplied as 2 sections. Each piece has one long edge with a profile to match the doors. The short edges are finished.

Corner post, 715x70x18mm

Spice drawer set, inc fronts, boxes & guides

Ref: FRSD5

Price: £46.17 (Excluding VAT at 17.5%)

Quantity:

Spice drawer packs are available for use with 500mm cabinets in 15 or 18mm board. The packs consist of the following: -
* 3 x Drawer fronts, 163mm wide x 139mm high
* 3 x Drawer boxes, 141mm wide x 250mm deep x 105mm high (sides)/
100mm high (ends)
* 2 x Drawer guides, 18mm wide x 200mm deep x 21mm high

The drawer guides are reversible to suit 15 or 18mm carcase material.

Base radius feature end, 890x100x100mm

Ref: FRRFE890

Price: £112.88 (Excluding VAT at 17.5%)

Quantity:

Base radius feature end, 890x100x100mm

Dresser radius feature end, 1210x100x100mm

Ref: FRRFE1210

Price: £145.28 (Excluding VAT at 17.5%)

Quantity:

Dresser radius feature end, 1210x100x100mm

Tall radius feature end, 2120x100x100mm

Ref: FRRFE2120

Price: £218.64 (Excluding VAT at 17.5%)

Quantity:

Tall radius feature end, 2120x100x100mm

Radius corner top section for cornice, 33x107x107mm

Ref: FRRTOP

Price: £23.49 (Excluding VAT at 17.5%)

Quantity:

Radius corner top section for cornice, 33x107x107mm

End panel, profiled front edge, finished on face, reverse and 3 square edges, 2400x610x28mm

Ref: FREP2400X28

Price: £146.14 (Excluding VAT at 17.5%)

Quantity:

End panel, profiled front edge, finished on face, reverse and 3 square edges, 2400x610x28mm.

End panel, finished on face, reverse and 4 square edges, 2400x650x18mm

Ref: FREP25

Price: £195.92 (Excluding VAT at 17.5%)

Quantity:

End panel, finished on face, reverse and 4 square edges, 2400x650x18mm.

This end panel is supplied with 3 lengths of unglued edging tape 2.4mx32mm

Flying shelf, profiled front edge, finished on face, reverse and 3 square edges, 2400x325x28mm

Ref: FRFS24

Price: £106.18 (Excluding VAT at 17.5%)

Quantity:

Flying shelf profiled front edge finished on face, reverse and 3 square edges, 2400x325x28mm

This end panel is supplied with 3 lengths of unglued edging tape 2.4mx32mm.

PVC edging, 150mx23x0.8mm

Ref: PET8FR

Price: £44.96 (Excluding VAT at 17.5%)

Quantity:

PVC edgings are primed for glue. Please note the following glues are suitable for Raukantex edging:

When manually applying Raukantex edging the following glues are suitable:
Dorus Ltd, product = LD 084.
Rakoll Ltd, Product = RAKOLLIT 77 & hardener.

150mm long x 23 mm wide x 0.8mm deep

PVC edging, 100mx23x2mm

Ref: PET2FR

Price: £74.21 (Excluding VAT at 17.5%)

Quantity:

as above but 100mm long x 23mm wide x 2mm deep

Online Catalogue | doors | laminate doors | Fresco | accessories

cabinet components, Claro Court Business Centre, Claro Road, Harrogate HG1 4BA. 01423 521467