accessories

Traditional stepped cornice made from foil wrapped MDF.

3050mm long x 67mm wide x 62mm high (when fitted).

Made from foil wrapped MDF and with 2mm radiused edges, this product can be used as a modern cornice, pelmet or even a narrow pilaster/filler.

3050mm x 50mm x 28mm

Profiled traditional lighting pelmet made from foil wrapped MDF.

3050mm long x 28mm thick x 50mm high.

Plinth made from foil wrapped mdf, 3050mm x 150mm high x 16mm thick. It is wrapped around both long edges.

A moulded plinth is also available in this range.

A decorative moulded plinth made from foil wrapped mdf. 3050mm x 160mm high x 25mm thick, it is wrapped around both long edges. Can be fitted by adding a baton to the back of the plinth and secured by screwing through the carcase base in to the baton

Corner post supplied as 2 sections, both at 715mm high x 70mm wide x 22mm thick. Each piece has one long edge with a profile to match the doors. The short edges are finished

Bottle rack profile, 1200mm long and can be cut to size. Has 13 grooves for bottles.

1200x58x20mm.

Plate rack made from solid timber spindles and rails. 1200mm long but can be cut down. Features 25 x 10mm diameter dowels at 47mm centres, set between 18mm top and bottom rails.

1200 x 336 x 18mm.

Unhanded wall quadrant supplied ready to assemble. Made from 22mm foil wrapped mdf. Top, base and shelf have a 10mm radius.

720mm high x 310mm x 310mm.

800mm wide cooker canopy. The size of the fascia used on the canopy is 797mm x 463mm. Supplied ready to assemble.

Spice drawer packs are available for use with 500mm cabinets in 15 or 18mm board. The packs consist of the following: -
* 3 x Drawer fronts, 163mm wide x 139mm high
* 3 x Drawer boxes, 141mm wide x 250mm deep x 105mm high (sides)/
100mm high (ends)
* 2 x Drawer guides, 18mm wide x 200mm deep x 21mm high

The drawer guides are reversible to suit 15 or 18mm carcase material.

This range of pilasters are 100mm wide x 100mm deep and are finished on the front and 2 sides.

This range of pilasters are 100mm wide x 100mm deep and are finished on the front and 2 sides.

This range of pilasters are 100mm wide x 100mm deep and are finished on the front and 2 sides.

This range of pilasters are 100mm wide x 100mm deep and are finished on the front and 2 sides.

A decorative mantel side panel. 1500mm long x 250mm wide, it can be reduced by up to 481mm at one end and 200mm at the other.

A decorative mantel top panel. 1500mm long x 250mm wide, it can be reduced by up to 295mm at each end.

Shaped shelf support made from foil wrapped mdf. 190mm high x 137mm deep x 18mm thick.

End panel, profiled front edge, finished face, reverse and 3 square edges 2400x610x28mm

End panel, tongue and groove, finished on face, reverse plain and 4 square edges 2400x650x18mm

End panel, finished on face, reverse and 4 square edges 2400x650x18mm

This end panel is supplied with 3 lengths of unglued edging tape 2.4mx32mm

Flying shelf, profiled front edge, finished on face, reverse and 3 square edges, 2400x325x28mm

A roll of pre-glued melamine edging tape 100m long x 22mm wide.

PVC edgings are primed for glue. Please note the following glues are suitable for Raukantex edging:

When manually applying Raukantex edging the following glues are suitable:
Dorus Ltd, product = LD 084.
Rakoll Ltd, Product = RAKOLLIT 77 & hardener.

150mm long x 23 mm wide x 0.8mm deep

as above but 100mm long x 23mm wide x 2mm deep