A shaped base section available for use with the cornice to offer an alternative chunky look. Made from veneer wrapped MDF.

Dimensions of base section: 3050mm long x 72mm wide x 47mm high.

Cornice base, castellated, 3050x47x72mm

Ref: EDCCCB30

Price: £82.76 (Excluding VAT at 17.5%)

Quantity:

A castellated base section available for use with the cornice to offer an alternative chunky look. Made from veneer wrapped MDF.

Dimensions of base section: 3050mm long x 72mm wide x 47mm high

Cornice corner block, left hand, 114x95x150mm

Ref: EDCCBL

Price: £99.75 (Excluding VAT at 17.5%)

Quantity:

Handing is determined by the end of the unit it is to be used on (as you look at it).

95mm wide x 150mm long x 114mm high.

Cornice corner block, right hand, 114x95x150mm

Ref: EDCCBR

Price: £99.75 (Excluding VAT at 17.5%)

Quantity:

as above but right handed

Lighting pelmet, 3050x50x18mm

Ref: EDCL30

Price: £30.01 (Excluding VAT at 17.5%)

Quantity:

Lighting pelmet made from veneer wrapped MDF.

3050mm long x 50mm highx 18mm thick.

Lighting pelmet, castellated, 3050x50x18mm

Ref: EDCCL30

Price: £55.12 (Excluding VAT at 17.5%)

Quantity:

A castellated lighting pelmet made from veneer wrapped MDF.

3050mm long x 50mm highx 18mm thick.

Plinth, 3050x150x16mm

Ref: EDCP30

Price: £60.13 (Excluding VAT at 17.5%)

Quantity:

Plinth made from veneer wrapped MDF. 3050mm long x 150mm high x 16.5mm thick.

Moulded plinth, 3050x160x25mm

Ref: EDCMP30

Price: £67.74 (Excluding VAT at 17.5%)

Quantity:

Shaped plinth made from veneer wrapped MDF.

3050mm long x 160mm high x 25.5mm thick

Curved cornice section for 300mm wall unit, left hand

Ref: EDCCCS300L

Price: £113.79 (Excluding VAT at 17.5%)

Quantity:

Traditional cornice specifically for use with Eden curved doors when in a wall unit application. Manufactured using plywood.
Total width 78mm
Total height 69mm (when fitted)
Please note there is an accepted +/- tolerance of up to 3% on this product.
This item is handed, as it is oversized by 15mm on one end, allowing it to be scribed into a wall.
Note - this item is not designed for use with the cornice base.

Curved cornice section for 300mm wall unit, right hand

Ref: EDCCCS300R

Price: £113.79 (Excluding VAT at 17.5%)

Quantity:

as above but right handed

Curved lighting pelmet section for 300mm wall unit, left hand

Ref: EDCCLS300L

Price: £79.80 (Excluding VAT at 17.5%)

Quantity:

Plywood veneer pelmet for use with the Eden curved doors, (note -the curved option is not available in the castellated style).
50mm high and 18mm deep when fitted, with a 1.5x1.5mm bevel between finished edges.

Please note there is an accepted +/- tolerance of up to 3% on this product.
This item is handed, as it is oversized by 15mm on one end, allowing it to be scribed into a wall.

Curved lighting pelmet section for 300mm wall unit, right hand

Ref: EDCCLS300R

Price: £79.80 (Excluding VAT at 17.5%)

Quantity:

as above but right handed

Curved plinth section for 560x300mm curved base unit

Ref: EDCCPS560

Price: £103.49 (Excluding VAT at 17.5%)

Quantity:

Veneered plywood curved plinth for use with the curved doors. Finished on face and 2 long edges

Corner post, 715x71x20mm

Ref: EDCCP30

Price: £35.45 (Excluding VAT at 17.5%)

Quantity:

Corner post supplied as 2 sections, both at 715mm high x 71mm wide x 20mm thick. Each piece has one long edge with a profile to match the doors. The short edges are finished.

Bottle rack, 1200x58x20mm

Ref: EDCBR12

Price: £43.10 (Excluding VAT at 17.5%)

Quantity:

Bottle rack which has 13 grooves for bottles and can be cut to size.

1200mm long x 58mm high x 20mm thick.

91mm between centre of each groove.

Plate rack, 1200x336mm

Ref: EDCPR12

Price: £133.25 (Excluding VAT at 17.5%)

Quantity:

Plate rack 1200mm long x 336mm high x 21mm thick. Rack has 25 x 10mm spindles at 48mm centres.

Wall quadrant, 720x320x320mm

Ref: EDCWQ720

Price: £277.75 (Excluding VAT at 17.5%)

Quantity:

Framed wall quadrant. 720mm high x 320mm wide x 320mm deep. Supplied in component form.

Wall quadrant, 900x320x320mm

Ref: EDCWQ900

Price: £344.88 (Excluding VAT at 17.5%)

Quantity:

Framed wall quadrant. 900mm high x 320mm wide x 320mm deep. Supplied in component form.

Floor quadrant, 720x580x320mm

Ref: EDCFQ720

Price: £335.58 (Excluding VAT at 17.5%)

Quantity:

Unhanded, framed floor quadrant. 720mm high x 320mm wide x 580mm deep. Supplied in component form.

Quadrant frame corner moulding, 120x150x18mm

Ref: EDCQFCM120

Price: £60.25 (Excluding VAT at 17.5%)

Quantity:

Corner moulding that can be used with Eden framed quadrants. Supplied as pairs, 1LH & 1RH.

150mm high x 120mm wide x 18mm thick

Cooker canopy, plain, 800x775mm

Ref: EDCECP8

Price: £477.57 (Excluding VAT at 17.5%)

Quantity:

A cooker canopy, 800mm wide x 775mm high x 474mm deep. The front of the canopy has a 797mm x 463mm fascia in the same style as the doors. Supplied in component form.

Cooker canopy, tongue & groove, 1000x610mm

Ref: EDCECP10

Price: £617.68 (Excluding VAT at 17.5%)

Quantity:

Tongued & grooved canopy: -
Width: 1000mm (can be cut down to 800mm)
Height: 610mm (can be reduced by up to 170mm)
Hood depth: 176mm (plus 18mm backboard)
Total depth: 484mm

Spice drawer set, inc fronts, boxes & guides

Ref: EDCSD5

Price: £53.08 (Excluding VAT at 17.5%)

Quantity:

Spice drawer packs are available for use with 500mm cabinets in 15 or 18mm board. The packs consist of the following: -
* 3 x Drawer fronts, 163mm wide x 139mm high
* 3 x Drawer boxes, 141mm wide x 250mm deep x 105mm high (sides)/
100mm high (ends)
* 2 x Drawer guides, 18mm wide x 200mm deep x 21mm high

The drawer guides are reversible to suit 15 or 18mm carcase material.

Base radius feature end panel pack, 890x100x50mm

Ref: EDCBFEP890

Price: £111.47 (Excluding VAT at 17.5%)

Quantity:

Pilaster is 890mm high x 50mm wide x 100mm deep.
Spacer is 890mm high x 50mm wide x 30mm deep.

A feature end panel pack consists of a radiused (25mm rad) solid timber pilaster and an mdf spacer. An 18mm end panel is added (not provided) to give a chunky, rounded finish to a run of units.

Dresser radius feature end panel pack, 1210x100x50mm

Ref: EDCDFEP1210

Price: £149.34 (Excluding VAT at 17.5%)

Quantity:

Pilaster is 1210mm high x 50mm wide x 100mm deep.
Spacer is 1210mm high x 50mm wide x 30mm deep.

A feature end panel pack consists of a radiused (25mm rad) solid timber pilaster and an mdf spacer. An 18mm end panel is added (not provided) to give a chunky, rounded finish to a run of units.

Tall radius feature end panel pack, 2120x100x50mm

Ref: EDCTFEP2120

Price: £300.71 (Excluding VAT at 17.5%)

Quantity:

Pilaster is 2120mm high x 50mm wide x 100mm deep.
Spacer is 2120mm high x 50mm wide x 30mm deep.

A feature end panel pack consists of a radiused (25mm rad) solid timber pilaster and an mdf spacer. An 18mm end panel is added (not provided) to give a chunky, rounded finish to a run of units.

Wall pilaster, 775x100x75mm

Ref: EDCWP775

Price: £143.61 (Excluding VAT at 17.5%)

Quantity:

Wall pilaster. 775mm high x 75mm wide x 100mm deep.

Wall pilaster, 955x100x75mm

Ref: EDCWP955

Price: £175.92 (Excluding VAT at 17.5%)

Quantity:

Wall pilaster. 955mm high x 75mm wide x 100mm deep

Floor pilaster, 890x100x75mm

Ref: EDCFP890

Price: £164.97 (Excluding VAT at 17.5%)

Quantity:

Floor pilaster. 890mm high x 75mm wide x 100mm deep.

Dresser pilaster, 1210x100x75mm

Ref: EDCDP1210

Price: £218.80 (Excluding VAT at 17.5%)

Quantity:

Dresser pilaster. 1210mm high x 75mm wide x 100mm deep.

Full pilaster, 2120x100x75mm

Ref: EDCFP2120

Price: £361.85 (Excluding VAT at 17.5%)

Quantity:

Pilaster. 2120mm high x 75mm wide x 100mm deep.

Floor column, 890x65x65mm

Ref: EDCFC890

Price: £118.89 (Excluding VAT at 17.5%)

Quantity:

A decorative column which can be used as an attractive feature, or to fill those awkward spaces. 890x65x65mm.

Mantel side panel, 1500x250x20mm

Ref: EDCMSP1500

Price: £139.90 (Excluding VAT at 17.5%)

Quantity:

A side mantel piece with features to co-ordinate with the door. A top mantel piece is also available.

1500mm long x 250mm wide x 20mm thick.

Note: These mantels have radiused edges and may require mitre joints

Mantel top panel, 1500x250x20mm

Ref: EDCMTP1500

Price: £139.33 (Excluding VAT at 17.5%)

Quantity:

A top mantel piece with features to co-ordinate with the door. A side mantel piece is also available.

1500mm long x 250mm wide x 20mm thick.

Note: These mantels have radiused edges and may require mitre joints.

Corbel, 245x188x137mm

Ref: EDCCORBEL

Price: £174.06 (Excluding VAT at 17.5%)

Quantity:

corbel 245mm high x 188mm wide x 137mm deep

Traditionally styled corbels offer decorative focal points. Taditionally used to enhance archways these decorative supports can also be used as shelf supports, mantle supports or under beams and worksurfaces.

Bracket, 267x79x149mm

Ref: EDCBRCKET

Price: £122.63 (Excluding VAT at 17.5%)

Quantity:

Traditionally styled corbel and bracket accessories offer decorative focal points. Taditionally used to enhance archways these decorative supports can also be used as shelf supports, mantle supports or under beams and worksurfaces

Shelf support, 137x190x18mm

Ref: EDCSS137

Price: £29.51 (Excluding VAT at 17.5%)

Quantity:

Shelf support, solid timber, finished on both faces. Supplied singularly. 190mm high x 137mm wide x 18mm thick.

Corner moulding, pair, 120x150x18mm

Ref: EDCCM120

Price: £54.99 (Excluding VAT at 17.5%)

Quantity:

Corner moulding. Supplied as pairs. 150mm high x 120mm wide x 18mm thick.

Shelf edging, solid, 2400x18x7mm

Ref: EDCSE24

Price: £35.04 (Excluding VAT at 17.5%)

Quantity:

Solid timber shelf edging. 2400mm long x 18mm wide x 7mm thick

End panel finished on face, 100mm of reverse, profiled front edge and 3 square edges, 2400x650x28mm

Ref: EDCEP2400X28

Price: £218.17 (Excluding VAT at 17.5%)

Quantity:

Veneered end panel with profiled edge,finished on one face, 100mm of reverse and 3 square edges, 2400x650x28mm.

End panel, finished on face and 4 square edges, sealed on reverse, 2400x650x18mm

Ref: EDCEP25

Price: £189.51 (Excluding VAT at 17.5%)

Quantity:

End panel finished on face and 4 square edges, sealed on reverse, 2400x650x18.

End panel, tongue and groove, finished on face, 100mm of reverse and 4 square edges, 2400x650x18mm

Ref: EDCGP24

Price: £238.52 (Excluding VAT at 17.5%)

Quantity:

Tongue and groove end panel, finished on face, 100mm of reverse (plain matching), and 4 square edges, 2400x650x18mm

Flying shelf, finished on face, reverse, profiled front edge and 3 square edges, 2400x325x28mm

Ref: EDCFS24

Price: £145.37 (Excluding VAT at 17.5%)

Quantity:

Veneered flying shelf with profiled front edge, (10mm radius), finished on face, reverse and 3 square edges, 2400x325x28mm.

Edging tape, pre-glued, 100mx22mm

Ref: EDCET1

Price: £38.08 (Excluding VAT at 17.5%)

Quantity:

A roll of pre-glued melamine edging tape 100m long x 22mm wide.

Veneer edging, un-glued, 3mx32mm

Ref: EDCVE3

Price: £15.52 (Excluding VAT at 17.5%)

Quantity:

Unglued veneer edging 3mx32mmx0.6mm.

PVC edging, 150mx23x0.8mm

Ref: PET8EDC

Price: £45.40 (Excluding VAT at 17.5%)

Quantity:

PVC edgings are primed for glue. Please note the following glues are suitable for Raukantex edging:

When manually applying Raukantex edging the following glues are suitable:
Dorus Ltd, product = LD 084.
Rakoll Ltd, Product = RAKOLLIT 77 & hardener.

150mm long x 23 mm wide x 0.8mm deep

PVC edging, 100mx23x2mm

Ref: PET2EDC

Price: £51.88 (Excluding VAT at 17.5%)

Quantity:

as above but 100mm long x 23mm wide x 2mm deep

cabinet components, Claro Court Business Centre, Claro Road, Harrogate HG1 4BA. 01423 521467