A curved corner block which can be used on top of a wall unit or dresser, above a radius feature end.

The end of the unit that it is to be used on (as you look at it) determines handing.

135mm wide x 180mm long x 37mm high.
Projection: 85mm (distance stands out from radius feature end)

Cornice corner block, right hand, 135x180x37mm

Ref: BSCBR

Price: £47.40 (Excluding VAT at 17.5%)

Quantity:

As above but for right hand (as you look at it)

Curved cornice section for 300mm wall unit, left hand

Ref: BSCCS300L

Price: £55.54 (Excluding VAT at 17.5%)

Quantity:

This curved cornice is specifically for use with the curved door when used in a wall application. Manufactured using plywood.
Total width 130mm (overhang 80mm)
Height when fitted 37mm
Please note there is an accepted +/- tolerance of up to 3mm on this product.
This item is handed, as it is oversized by 15mm on one side, allowing it to be scribed to a wall.

Curved cornice section for 300mm wall unit, right hand

Ref: BSCCS300R

Price: £55.54 (Excluding VAT at 17.5%)

Quantity:

as above but for right hand

Lighting pelmet, raw sanded, 3030x50x28mm

Ref: BSL30

Price: £26.05 (Excluding VAT at 17.5%)

Quantity:

Veneer wrapped MDF pelmet which can also act as a modern cornice or pilaster. Finished 3 sides.
When fitted as pelmet 50mm high x 28mm deep. Has 1.5 x 1.5 mm bevel between finished edges.

Curved lighting pelmet section for 300mm wall unit, left hand

Ref: BSCLS300L

Price: £24.46 (Excluding VAT at 17.5%)

Quantity:

Plywood veneer pelmet for use with the curved doors.
50mm high and 28mm deep when fitted, with a 1.5x1.5mm bevel between finished edges.
Please note there is an accepted +/- tolerance of up to 3mm on this product.
This item is handed, as it is oversized by 15mm at one end, allowing it to be scribed to a wall.

Curved lighting pelmet section for 300mm wall unit, right hand

Ref: BSCLS300R

Price: £24.46 (Excluding VAT at 17.5%)

Quantity:

As above but for right hand

Plinth, raw sanded, 3030x150x16mm

Ref: BSP30

Price: £43.44 (Excluding VAT at 17.5%)

Quantity:

Veneered MDF plinth. Finished on face and 2 long edges.

Curved plinth section for 560x300mm curved base unit

Ref: BSCPS560

Price: £45.41 (Excluding VAT at 17.5%)

Quantity:

Veneered plywood curved plinth for use with the curved doors. Finished on face and 2 long edges.

Worktop edge, 2 piece, raw sanded, 3050mm

Ref: BSW30

Price: £55.75 (Excluding VAT at 17.5%)

Quantity:

Corner post raw sanded, 715x70x20mm

Ref: BSCP30

Price: £25.30 (Excluding VAT at 17.5%)

Quantity:

Corner post supplied as 2 sections. Each piece has one long edge with a profile to match the doors. The short edges are finished.

Corner post, 715x70x20mm

Bottle rack, raw sanded, 1200x58x20mm

Ref: BSBR12

Price: £51.64 (Excluding VAT at 17.5%)

Quantity:

Bottle rack profile. Solid timber 1200mm long and can be cut to size. Product has 13 grooves for bottles.

1200x58x20mm

Modern bottle rack, 763x450x20mm

Ref: BSMBR800

Price: £84.20 (Excluding VAT at 17.5%)

Quantity:

Modern style bottle rack with lightweight stainless steel effect tubes. Each tube is 14mm dia., and fitted at 80mm centres, with an exposed height of 390mm.

Plate rack, raw sanded, 1200x336mm

Ref: BSPR12

Price: £53.65 (Excluding VAT at 17.5%)

Quantity:

Plate rack made from solid timber spindles and rails. 1200mm long but can be cut down. Features 25 x 10mm diameter dowels at 47mm centres, set between 18mm top and bottom rails.

1200 x 336 x 18mm.

Modern plate rack, 1200x336mm

Ref: BSMPR1200

Price: £137.76 (Excluding VAT at 17.5%)

Quantity:

Modern style plate rack with 25 lightweight stainless steel effect tubes. Each tube is 14mm dia., and fitted at 48mm centres, with an exposed height of 298mm.

Wall quadrant, raw sanded, 720x310x310mm

Ref: BSWQ720

Price: £143.25 (Excluding VAT at 17.5%)

Quantity:

Quadrants made from veneered panels. The top, base and side boards are 28mm thick, while the shelves are 18mm. Supplied ready to assemble.

Wall quadrant, raw sanded, 900x310x310mm

Ref: BSWQ900

Price: £165.71 (Excluding VAT at 17.5%)

Quantity:

As above but to fit a 900mm high cabinet

Floor quadrant, raw sanded, 720x580x310mm

Ref: BSFQ720

Price: £178.12 (Excluding VAT at 17.5%)

Quantity:

as above but to fit base unit

Cooker canopy, plain, raw sanded, 800x775mm

Ref: BSECP8

Price: £306.32 (Excluding VAT at 17.5%)

Quantity:

800mm wide cooker canopy. The size of the fascia used on the canopy is 797mm wide x 463mm high and matches the doors of the range. Supplied ready to assemble.

Spice drawer set, raw sanded, inc fronts, boxes & guides

Ref: BSSD5

Price: £42.40 (Excluding VAT at 17.5%)

Quantity:

The Broadoak spice drawer fronts feature an elliptical finger hole for easy opening. The reverse side is solid.

Spice drawer packs are available for use with 500mm cabinets in 15 or 18mm board. The packs consist of the following: -
* 3 x Drawer fronts, 163mm wide x 139mm high
* 3 x Drawer boxes, 141mm wide x 250mm deep x 105mm high (sides)/
100mm high (ends)
* 2 x Drawer guides, 18mm wide x 200mm deep x 21mm high

The drawer guides are reversible to suit 15 or 18mm carcase material.

Base radius feature end panel pack, 890x100x50mm

Ref: BSBFEP890

Price: £70.91 (Excluding VAT at 17.5%)

Quantity:

A feature end panel pack consists of a radiused (25mm rad) solid timber pilaster and an mdf spacer. An 18mm end panel is added (not provided) to give a chunky, rounded finish to a run of units.

The end panel is fixed to the pilaster and spacer by screwing from the rear and then the assembly can be fitted to the unit by screwing from inside the carcase. Screws are not supplied.

Dresser radius feature end panel pack, 1210x100x50mm

Ref: BSDFEP1210

Price: £95.28 (Excluding VAT at 17.5%)

Quantity:

as above but to fit dresser

1210 high x 50mm wide x100mm deep

Tall radius feature end panel pack, 2120x100x50mm

Ref: BSTFEP2120

Price: £191.69 (Excluding VAT at 17.5%)

Quantity:

as above but taller size

2120 high x 50mm wide x 100mm deep

Wall pilaster, raw sanded, 775x60x50mm

Ref: BSWP775

Price: £55.93 (Excluding VAT at 17.5%)

Quantity:

Wall pilaster, 775mm high x 50mm wide x 60mm deep.

50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).

Wall pilaster, raw sanded, 955x60x50mm

Ref: BSWP955

Price: £66.52 (Excluding VAT at 17.5%)

Quantity:

Wall pilaster, 955mm high x 50mm wide x 60mm deep.

50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).

Floor pilaster, raw sanded, 890x85x50mm

Ref: BSFP890

Price: £65.13 (Excluding VAT at 17.5%)

Quantity:

Floor pilaster, 890mm highx50mm widex85mm deep.

50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).

End panel, finished on face, 100mm of reverse and 4 square edges, 2400x650x28mm

Ref: BSEP2400X28

Price: £132.89 (Excluding VAT at 17.5%)

Quantity:

End panel, finished on face, 100mm on reverse and 4 square edges, 2400x650x28mm

End panel, tongue and groove, finished on face, 100 of reverse and 4 square edges, 2400x650x18mm

Ref: BSGP24

Price: £163.45 (Excluding VAT at 17.5%)

Quantity:

Tongue & grooved, veneered end panel is finished on 1 face and 4 square edges,2400x650x18mm.

End panel, finished on face, 4 square edges and sealed on reverse 2400x650x18mm

Ref: BSEP25

Price: £114.44 (Excluding VAT at 17.5%)

Quantity:

End panel finished on face and 4 square edges, sealed on reverse, 2400x650x18.

Flying shelf, finished on face, reverse and 4 square edges, 2400x325x28mm

Ref: BSFS24

Price: £91.45 (Excluding VAT at 17.5%)

Quantity:

Flying shelf , finished on face, reverse and 4 square edges, 2400x325x28mm.

cabinet components, Claro Court Business Centre, Claro Road, Harrogate HG1 4BA. 01423 521467