accessories

Cornice made from pvc foil wrapped MDF

Total width 130mm (overhang 80mm)
Height when fitted 37mm

A curved corner block which can be used on top of a wall unit or dresser, above a radius feature end. The corner blocks should be used in conjunction with the cornice above. The end of the unit that it is to be used on (as you look at it) determines handing.

135mm wide x 180mm long x 37mm high.
Projection: 85mm (distance stands out from radius feature end)

as above but for right handing

Made from pvc foil wrapped MDF

This product can be used as a pelmet or as a modern cornice.

3030mm long x 50mm high x 28mm deep

Plinth made from PVC foil wrapped MDF

3050mm long x 150mm high x 16mm deep

800mm wide cooker canopy. The size of the fascia used on the canopy is 797mm x 463mm. Supplied in component form.

Corner post supplied as 2 sections. Each piece has one long edge with a profile to match the doors. The short edges are finished.

70mm wide x 715mm high x 22mm deep

Bottle rack profile, 1200mm long and can be cut to size. Has 13 grooves for bottles.

1200 long x 58mm high x 20mm deep.

Plate rack made from solid timber spindles and rails. 1200mm long but can be cut down. Features 25 x 10mm diameter dowels at 47mm centres, set between 18mm top and bottom rails.

1200mm long x 336mm high x 18mm deep.

Spice drawer packs are available for use with 500mm cabinets in 15 or 18mm board. The packs consist of the following: -
3 x Drawer fronts, 163mm wide x 139mm high
3 x Drawer boxes, 141mm wide x 250mm deep x 105mm high (sides)/
100mm high (ends)
2 x Drawer guides, 18mm wide x 200mm deep x 21mm high

The drawer guides are reversible to suit 15 or 18mm carcase material.

Pilaster is 890mm high x 50mm wide x 100mm deep.
Spacer is 890mm high x 50mm wide x 30mm deep.

A feature end panel pack consists of a radiused (25mm rad) pilaster and a spacer. An 18mm end panel is added (not provided) to give a chunky, rounded finish to a run of units. Pilaster is made from vinyl wrapped mdf. Spacer is mdf.

as above but to fit dresser

1210 high x 50mm wide x100mm deep

as above but taller size

2120 high x 50mm wide x 100mm deep

50mm wide pilaster, plain in style with chamfered edges. The pilasters are finished on 3 sides (front and 2 sides).

End panel, profiled front edge, finished face, reverse and 3 square edges 2400x610x28mm

End panel, finished on face, reverse and 4 square edges 2400x650x18mm

This end panel is supplied with 3 lengths of unglued edging tape 2.4mx32mm

Flying shelf, profiled front edge, finished on face, reverse and 3 square edges, 2400x325x28mm

End panel, tongue and groove, finished on face, reverse plain and 4 square edges 2400x650x18mm

A roll of pre-glued melamine edging tape 100m long x 22mm wide.

PVC edgings are primed for glue. Please note the following glues are suitable for Raukantex edging:

When manually applying Raukantex edging the following glues are suitable:
Dorus Ltd, product = LD 084.
Rakoll Ltd, Product = RAKOLLIT 77 & hardener.

150mm long x 23 mm wide x 0.8mm deep

as above but 100mm long x 23mm wide x 2mm deep