A modern curved cornice/light pelmet for use with the radius feature ends.

Dimensions: -
28mmx50mm/337mm long x 103mm wide, with a 64mm outer radius.

Finished on the front side & 2 edges, reverse is matt lacquered.

Modern cornice for use with the small curved door, 300mm unit, unhanded

Ref: VCCCS300SD

Price: £68.43 (Excluding VAT at 17.5%)

Quantity:

A modern vinyl wrapped curved cornice/light pelmet for use with the small curved door.

Plinth, 3050x150x16mm

Ref: VCP30

Price: £42.26 (Excluding VAT at 17.5%)

Quantity:

Vinyl wrapped Plinth, 3050x150x16mm

Plinth, flexible laminate, 2450x150x1.5mm

Ref: VCFP24

Price: £85.59 (Excluding VAT at 17.5%)

Quantity:

Plinth, flexible laminate, 2450x150x1.5mm

Curved plinth section for 560x430mm curved base unit

Ref: VCCPS560

Price: £73.91 (Excluding VAT at 17.5%)

Quantity:

A modern curved plinth for use with the curved base unit doors.

Dimensions: -
150mm x 16mm/531mm long x 386mm wide, with a 313mm outer/297mm inner radius with straight ends
The length can be reduced by 15mm to allow for a shallower carcase

Finished on the front side with the reverse matt lacquered.

NOTE - The plinth should be set 44mm back from the carcass

Curved plinth section for use with the small curved door 530x150x16mm

Ref: VCCPS560SD

Price: £73.27 (Excluding VAT at 17.5%)

Quantity:

A modern curved plinth for use with the small curved door.

S' shaped plinth 800mm

Ref: VCSP800

Price: £78.68 (Excluding VAT at 17.5%)

Quantity:

Curved 'S' shaped plinth for use with either 'S' shaped doors or drawer fronts.

Dimensions: -
150mm x 16mm x 800mm

Finished on front side and matt lacquered on reverse. Top and bottom edges are not edgebanded.

S' shaped plinth 1000mm

Ref: VCSP1000

Price: £80.20 (Excluding VAT at 17.5%)

Quantity:

As above but 1000mm

S shaped plinth, 1200x150x16mm

Ref: VCSP1200

Price: £83.61 (Excluding VAT at 17.5%)

Quantity:

as above but 1200mm

Corner post, 715x70x18mm

Ref: VCCP30

Price: £37.39 (Excluding VAT at 17.5%)

Quantity:

Corner post supplied as 2 sections. Each piece has one long edge with a profile to match the doors. The short edges are finished.

Corner post, 715x70x18mm

Base radius feature end, 890x100x100mm

Ref: VCRFE890

Price: £199.46 (Excluding VAT at 17.5%)

Quantity:

Base radius feature end, 890x100x100mm

Dresser radius feature end, 1210x100x100mm

Ref: VCRFE1210

Price: £255.10 (Excluding VAT at 17.5%)

Quantity:

Dresser radius feature end, 1210x100x100mm

Tall radius feature end, 2120x100x100mm

Ref: VCRFE2120

Price: £308.04 (Excluding VAT at 17.5%)

Quantity:

Tall radius feature end, 2120x100x100mm

Radius corner top section for cornice, 33x107x107mm

Ref: VCRTOP

Price: £36.08 (Excluding VAT at 17.5%)

Quantity:

Radius corner top section for cornice, 33x107x107mm

End panel, profiled front edge, finished on face, reverse and 3 square edges 2400x610x28mm

Ref: VCEP2400X28

Price: £183.87 (Excluding VAT at 17.5%)

Quantity:

End panel, profiled front edge, finished on face, reverse and 3 square edges, 2400x610x28mm.

End panel, finished on face, reverse and 4 square edges 2400x650x18mm

Ref: VCEP25

Price: £246.55 (Excluding VAT at 17.5%)

Quantity:

End panel, finished on face, reverse and 4 square edges, 2400x650x18mm.

This end panel is supplied with 3 lengths of unglued edging tape 2.4mx32mm

Flying shelf, profiled front edge, finished on face, reverse and 3 square edges 2400x325x28mm

Ref: VCFS24

Price: £144.99 (Excluding VAT at 17.5%)

Quantity:

Flying shelf profiled front edge finished on face, reverse and 3 square edges, 2400x325x28mm

This end panel is supplied with 3 lengths of unglued edging tape 2.4mx32mm.

Edging tape, pre-glued, 100mx22mm

Ref: VCET1

Price: £36.36 (Excluding VAT at 17.5%)

Quantity:

A roll of pre-glued melamine edging tape 100m long x 22mm wide.

PVC edging, 150mx23x0.8mm

Ref: PET8VC

Price: £67.99 (Excluding VAT at 17.5%)

Quantity:

PVC edgings are primed for glue. Please note the following glues are suitable for Raukantex edging:

When manually applying Raukantex edging the following glues are suitable:
Dorus Ltd, product = LD 084.
Rakoll Ltd, Product = RAKOLLIT 77 & hardener.

150mm long x 23 mm wide x 0.8mm deep

PVC edging, 100mx23x2mm

Ref: PET2VC

Price: £77.85 (Excluding VAT at 17.5%)

Quantity:

as above but 100mm long x 23mm wide x 2mm deep

cabinet components, Claro Court Business Centre, Claro Road, Harrogate HG1 4BA. 01423 521467